Este trabalho descreve a síntese e a caracterização de BiFeO3 obtido a partir da rota Pechini, utilizando-se nitrato de bismuto e nitrato de ferro como precursores. Os pós foram calcinados a 800 °C em ar durante 2 h. Os difratogramas de raios X mostraram que o material apresenta duas fases, BiFeO3 (95%) e α-Bi2O3 (5%). A transição de fase ferroelétrica da amostra em 821 °C foi detectada por análise térmica diferencial. Os resultados das análises por microscopia eletrônica de varredura (SEM), espectroscopia de energia dispersiva (EDS) e fluorescência de raios X por dispersão de energia (EDX) mostraram que a amostra é quimicamente homogênea. As imagens de microscopia eletrônica de transmissão revelaram que a amostra é uniforme e apresenta partículas com formato esférico e tamanho médio de 30 nm.

This work describes the synthesis and characterization of BiFeO3 obtained by the Pechini route using bismuth nitrate and iron nitrate as precursors. The powders were annealed at 800 °C in air for 2 h. X-ray diffraction patterns showed that the material presents two phases, BiFeO3 (95%) and α-Bi2O3 (5%). The ferroelectric transition of the sample at 821 °C was detected by differential thermal analysis. Results of analyses by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and energy dispersive X-ray fluorescence (EDX) showed that the sample is chemically homogeneous. Transmission electron microscopy images revealed that the sample is uniform and contains spherical particles with an average size of 30 nm.

This paper deals with the most common methods for determining the dc electrical resistivity in solid materials. A brief overview of the fundamental concepts related to the electrical resistivity on materials is introduced. Undoubtedly, the most common and useful procedure to determine the electrical resistivity (rho) is the fourpoint probe method. Some crucial mistakes regarding the experimental procedure and the appropriated correction factors are found in the literature. Thus, the correction factor for the most common sample geometries were gathered and revised in order to provide an easy way to use and apply them.